Do you understand the performance of fluorocarbon anti-corrosion paint?

Characteristics of fluorocarbon paint:

(1) Excellent anti-corrosion performance - thanks to good chemical inertness, paint film resistance to acid, alkali, salt and other chemical substances, as well as various chemical solvents, providing a protective barrier for the substrate; The paint film is tough with high surface hardness, impact resistance, flexural resistance, and good wear resistance. Showing excellent physical and mechanical properties.

(2) Maintenance free, self-cleaning - Fluorocarbon coatings have low surface energy, surface dust can be self cleaned by rainwater, good hydrophobicity (high water absorption rate less than 5%), oil repellency, small friction coefficient (0.15-0.17), no dust or scaling, and good anti fouling properties.

(3) Strong adhesion - It has excellent adhesion on the surfaces of metals such as copper and stainless steel, plastics such as polyester, polyurethane, vinyl chloride, cement, composite materials, etc., and basically shows the characteristics of being suitable for attachment to any material. High decorative - can achieve over 80% high gloss in a 60 degree gloss meter.

(4) Ultra long weather resistance - The coating contains a large number of F-C bonds, which determine its stability. It does not pulverize or fade, and has a service life of up to 20 years. It has better performance than any other type of coating. Excellent construction performance - dual component packaging, long storage period, and convenient construction.

Notes:

1. The prepared paint and coating should be used up within 5 hours to avoid being invalidated beyond the activation period;

2. The fluorocarbon paint should be placed in a dry, waterproof, leak proof, sun proof, heat-resistant, and away from sources of fire;

3. After opening the can, filter it with 120-200 mesh before use;

4. Construction temperature: 0-35 ℃ is suitable, and the relative humidity is less than 80 ° C?. Relative advantage

Compared with traditional paint coatings, it has better light resistance and weather resistance;

Compared with traditional aluminum-plastic panels for exterior walls, it is easier to operate, renovate, and is not limited by the shape of the building, allowing designers to unleash their imagination;

3. The cost is much lower than aluminum-plastic panels and can achieve the same effect;

4. Lightweight, it will not bring a heavy burden to the wall, and there is no risk of aluminum-plastic panels falling.

Matching primer:

Steel surface: epoxy or polyurethane primer, intermediate paint.

Plastic or fiberglass: can be directly used after surface treatment.

Cement or ceramic tile surface: After being treated (polished) with putty, epoxy or polyurethane wall sealing primer and intermediate paint can be used.

Construction requirements and storage

(1) Before painting, the surface dust, oil, rust, etc. of Shanghai painted objects must be cleaned to ensure the quality of painting. Water is strictly prohibited during construction.

(2) The paint ratio is: component A (base material) and component B (curing agent)=1 (barrel): 1 (barrel).

(3) The construction ratio method is as follows: open the large mouth of component A, add component B to component A, and mix thoroughly and evenly. After 30 minutes of maturation, the coating can be applied.

(4) This material is required to be used as needed and cannot be stored for a long time. The formulated coating must be used up within six hours. Incomplete materials should be sealed and stored.

(5) Construction should choose sunny weather and avoid working in windy, sandy, rainy, and snowy weather conditions. The optimal temperature for painting is 5-30 ℃. Construction should be stopped when it is cloudy, rainy, foggy, snowy, or when the relative humidity exceeds 75%.

(6) During construction, if the paint is too thick, a special diluent can be used to adjust the construction viscosity.

(7) Fluorocarbon paint products should be stored in a cool and dry place to prevent direct sunlight exposure, isolate fire sources, and keep away from heat sources.