Fluorine rubber joint

Stable quality: Implement full process quality monitoring, meticulous and comprehensive testing!
Reasonable price: Strictly controlling costs, reducing expenses, and benefiting customers!
Fast delivery: With a new production line and sufficient stock, the delivery time has been shortened!

Hotline：0577-67355810

Product Introduction:

Flexible rubber joints, also known as shock absorbers, rubber soft joints, rubber soft connections, shock absorbers, etc. A flexible rubber joint is a flexible connector for metal pipelines, consisting of an inner rubber layer, reinforced with nylon curtain fabric, a rubber sphere composite with an outer rubber layer, and a loose metal flange.

Performance characteristics:

It has the characteristics of high pressure resistance, good elasticity, large displacement, balanced pipeline deviation, absorption of vibration, good noise reduction effect, and convenient installation.

Applicable scope:

It can be widely used in water supply and drainage, circulating water, HVAC, fire protection, paper making, pharmaceutical, petrochemical, ship, pump, compressor, fan and other pipeline systems.

Applicable media: water, oil, seawater, acid, alkali.

project	model	JGD-1	JGD-2	JGD-3
Working pressure MPa(kgf/cm2)		1（10）	1.6（16）	2.5（25）
burst pressure MPa(kgf/cm2)		2（20）	3（30）	4.5（45）
vacuum degree KPa(mm/Hg)		53.3（400）	86.7（650）	100（750）
Temperature ℃		-15℃～115℃ Special reachable-30℃～160℃
Applicable Medium		Air, compressed air, water, seawater, hot water, oil, acid, alkali, etc.

Nominal Diameter		L	b	Number of bolts	Bolt diameter mm	Bolt hole center (circle diameter mm)	Axial displacement mm		lateral displacement mm	Deflection angle a1+a2
mm	inch	L	b	Number of bolts	Bolt diameter mm	Bolt hole center (circle diameter mm)	elongate	compress	lateral displacement mm	Deflection angle a1+a2
32	1.25	95	16	4	18	100	6	9	9	15
40	1.5	95	18	4	18	110	6	10	9	15
50	2	105	18	4	18	125	7	10	10	15
65	2.5	115	20	4	18	145	7	13	11	15
80	3	135	20	4	18	160	8	15	12	15
100	4	150	22	8	18	180	10	19	13	15
125	5	165	24	8	18	210	12	19	13	15
150	6	180	24	8	23	240	12	20	14	15
200	8	210	24	8	23	295	16	25	22	15
250	10	230	26	12	23	350	16	25	22	15
300	12	245	28	12	23	400	16	25	22	15
350	14	255	28	16	23	460	16	25	22	15
400	16	255	30	16	25	515	16	25	22	15
450	18	255	30	20	25	565	16	25	22	15
500	20	255	32	20	25	620	6	25	22	15
600	24	260	36	20	30	725	6	25	22	15
700	28	260	36	24	30	840	16	25	22	15
800	32	260	38	24	34	950	16	25	22	15
900	36	260	42	28	34	1050	6	25	22	15
1000	40	260	44	28	34	1160	18	26	24	15
1200	48	260	48	32	41	1380	18	26	24	15
1400	56	350	44	36	34	1560	20	28	26	15
1600	64	350	46	40	34	1760	25	35	30	10
1800	72	350	52	44	41	1970	25	35	30	10
2000	80	420	54	48	48	2180	25	35	30	10
2200	88	580	40	52	48	2390	25	35	30	10
2400	96	610	41	56	48	2600	25	35	30	10
2600	104	650	42	60	54	2810	25	35	30	10
2800	112	680	45	64	54	3020	25	35	30	10
3000	120	680	50	68	54	3220	25	35	30	10
Note: 1. Special requirements can be customized by letter or drawing. The flange shall be in accordance with the National General Water Supply and Drainage Standard Atlas, while others shall be in accordance with HG/T2289-92. 2. The working pressure of DN350-600 (2) type is 1.6MPa, and the working pressure of DN32-400 (3) type is 2.5MPa. 3. The working pressure of DN700-DN200 is 1.0MPa, DN1400 is 0.6MPa, DN1600-DN1800 is 0.4MPa, and the flange is selected according to 0.6MPa. The working pressure of DN2000 is 0.25MPa, and the flange is selected at a pressure of 0.6MPa. 4. High rise water supply uses products with a diameter of DN200 or above, and pipes must have fixed supports or brackets. Otherwise, anti pull devices should be installed for the products.

Prev：Fluorine rubber joint

Next：Fluorine lined flexible rubber joint

Related Information